HDD Raw Copy Tool is a utility for low-level, sector-by-sector hard disk duplication and image creation. Supported interfaces: S-ATA (SATA), IDE (E-IDE), SCSI, SAS, USB, FIREWIRE. Big drives (LBA-48) are supported. Supported HDD/SSD Manufacturers: Intel, OCZ, Samsung, Kingston, Maxtor, Hitachi, Seagate, Samsung, Toshiba, Fujitsu, IBM, Quantum, Western Digital, and almost any other not listed here. The program also supports low-level duplication of FLASH cards (SD/MMC, MemoryStick, CompactFlash, SmartMedia, XD) using a card-reader. HDD Raw Copy tool makes an exact duplicate of a SATA, IDE, SAS, SCSI or SSD hard disk drive. Will also work with any USB and FIREWIRE external drive enclosures as well as SD, MMC, MemoryStick and CompactFlash media. The tool creates a sector-by-sector copy of all areas of the hard drive (MBR, boot records, all partitions as well as space in between). HDD Raw Copy does not care about the operating system on the drive – it could be Windows, Linux, Mac, or any other OS with any number of partitions (including hidden ones). Bad sectors are skipped by the tool. If your media has a supported interface then it can be copied with HDD Raw Copy! In addition, HDD Raw Copy can create an exact raw (dd) or compressed image of the entire media (including service data such as MBR, Boot records, etc). Again, all filesystems (even hidden) are supported.
HDD Raw Copy Tool could be used where you are trying to recover lost data from the disk; creating an exact copy through it and then recover data from copied version may help you recover more data while original disk will remain untouched. Summary: When you consider investing a new HDD/SSD, let EaseUS raw HDD copy tool copy all data and OS from the old drive to the new one. Besides, when you badly want to recover important data from a bad hard drive that can no longer work properly, let EaseUS raw HDD copy tool safely migrate data on all hard drive sectors to a new one.
I have a 500G HDD that came with my Mac. About 30 GB are currently used.
I want to replace the 500G HDD with a 256G solid state one. I'm running HDD Raw Copy to do this.
It didn't complain about the fact that the destination is much smaller than the source. It's started the copy.
I'm not sure this will work! How does an HDD work? Will all the vital data be in the 'early' sectors? What if there is a piece of data in a far off sector in a far away platter?
This site recommends that I:
Place your original drive in an external enclosure.
If running OS X 10.7 or later, boot to the recovery partition on your original drive by holding down Command-R and starting up.
Use Disk Utility to Restore to your new drive.
Restart or Boot your Mac to the new drive.
Would that have been a better route to take, considering the destination drive is much smaller than the source?
Der HochstaplerHDD Raw Copy Tool is a utility for low-level, sector-by-sector hard disk duplication and image creation. Detect and display hard disk drive and SSD health and temperature information without starting the installed operating system. Seagate ST500DM002 Barracuda 'Failed to read Sector '0' Thorix. Thorix Hard Drive Recovery Work Bench - Who designed them? November 5th, 2018, 16:38. Minho Mac T2 Chip Data Recovery Now Possible. November 5th, 2018, 8:45. HDD Raw Copy Tool Error: Athosza. August 3rd, 2018, 9:45. HDD Raw Copy is a useful tool if you want to duplicate the contents of your drive. Inexperienced individuals might have some troubles while working with this tool, due to the advanced nature of the task. This is available HDD cloning software, free download, and can perform hard disk duplication on low-level and sector by sector process. For the entire media, exact raw or the compressed image can be created. Tool to copy files of HDD with bad sectors [closed] Ask Question. I don't seem to easily find a tool to copy that one file (and maybe others later), preferably freeware of course. Roadkil was great for raw data copy. Unfortunately, I could only get it to work on Windows 8, not Windows 10. But hey, it's free!
bobobobobobobobo1 Answer
I can't speak for Raw Copy from experience, but looking at the site it appears that it will happily copy your data over, without warning you that the system will be useless :/
The instructions you posted above are exactly what I recommend, and will cause you the least amount of grief; the concern I have is that when you do a disk dump from one drive to another, it doesn't just copy your files; it copies what the drive thinks it looks like. The file allocation table will assume that it lives on a 500gig drive, because that is how it was partitioned. The moment it tried to read past the physical location of 256gigs, there just wont be a sector to address. Would be like half the planet falling off, but you have no way to know till you're in an airplane on the way to Japan.